The complete line consists of extruder, T-die, cooling tank. Take off units, stretching unit, winding unit and control panel. It is possible to produce polypropylene flat yarn in the range of 600 and 5000 denier. The capacity the lines is 125-400kg/h for 1000 denier. The width of the flat yarn is in the range of 2-3 mm. The strength of the yarn is 4-5,5p/denier at athickness of 49 micron. The winding section consists of individually- driven spindles with traverse mechanism for accurate yarn distiribution on spindles.         Type SM 75 EX SM 90 EX SM 100 EX SM 120 EX   Maximum Extrusion Capacity 120 kg/h 225 kg/h 325 kg/h 400 kg/h   Screw diameter 75 mm 90 mm 100 mm 120 mm   L/D ratio 32 D 32 D 32 D 32 D   Screw Revolutions 20-120 rpm 20-120 rpm 20-120 rpm 20-120 rpm   Die lip width 700 mm 1000 mm 1100 mm 1300 mm   Maximum productional speed 300 m/min 300 m/min 300 m/min 300 m/min   Flat thread fibre scope 600-5000'den 600-5000'den 600-5000'den 600-5000'den   Drawing ratio 5-8 5-8 5-8 5-8   NO. Of winding head 96 Spindle 140 Spindle 160 Spindle 220 Spindle   Connected power 125 kw 180 kw 225 kw 300 kw   Working power 80 kw 120 kw 145 kw 195 kw   Space requirement (LxWxH) 21000x3000 x2200 mm 23500x3500 x2200 mm 26000x3600 x2200 mm 31000x4100 x2200 mm   Weight 10 T 14 T 19 T 23 T